The universal wet cut-off machine Qcut 500 A meets the highest of demands on space available and possibilities for cutting with its innovative concept for design, construction and operation. The automatic horizontal table (X-axis) and cutting wheel movement (Y-axis) can reach up to 80 mm/ sec. through highly dynamic axis drives in rapidrun.
A wide range of cutting procedures is at your disposal for the very best cutting results. Through the combination of this unlimited range of positions, series cuts or differing cut sequences can be made into reality - all made possible by such a large variety of positions. The cutting process is rightly supported by controlled cut-off wheel revolutions. Control of the cutting speed and a soft start control serve additionally for an economical cutting feed. Manual control commands in the X-/Z-/Y-axes are also possible using an industrial joystick.
Travel and cutting wheel offer a wide-ranging repertoire of types of cut through different combinations. In addition to the linear diagonal cut, the layer and segment-cuts are recommended for gentle cuts. The layer-cut is well-suited for cutting taller and longer objects as well as solid material. The segment-cut is especially suitable for large objects and hard materials.
Touch-Screen display for the QATM-Software control is easy to read thanks to smart phone technology and even easier to operate. Compact program sequences are easy to compile and therefore enable automated, password-secured program sequences. Update and back-up possible via USB.
In addition to the type of cut, variable pulse-cut feed can also be selected. Rhythmic pulsed feed ensures regular cooling and removal of cutting debris from the sample.
Using your existing broadband Internet connection, QATM provides an online fault diagnosis and operator support.
With line laser you can display the scheduled cut on the sample. This helps to define the exact cutting position.
|
|
Резка более надежна, безопасна и эффективна, если для ее обработки используются правильные ингредиенты: знания, забота и правильный выбор расходных материалов и инструментов.
Our innovative clamping devices are used to clamp workpieces securely and precisely to ensure exact cutting and grinding processes. There is a wide range of different clamping devices that have been developed for specific applications and workpiece sizes.
Рабочий диск | до ø 508 мм/20" |
Макс. отрезная способность | ø 190 мм |
Размер фланца крепления диска | ø 32/40 мм |
Перемещение по оси X автоматическое | 420 мм |
Перемещение по оси Y автоматическое | 280 мм |
Перемещение по оси Z автоматическое (опция) | 200 мм |
Прецизионная ось Z | 0,1 мм |
Стол с перемещением по оси Z ШхГл | 550 x 500 мм, нержавеющая сталь |
Стол без перемещения по оси Z ШхГл | 700 x 500 мм, нержавеющая сталь |
Т-образный паз | 12 мм |
Скорость | Регулируемая скорость вращения 1000-2800 /1000-2400 об/мин |
Потребляемая мощность | 30 кВА |
Мощность привода (основной привод) | 15 кВт, S1 режим работы |
Габариты ШхВхГл | 1300 x 1820 x 1250 мм |
Вес | ~ 1000 кг в зависимости от комплектации прибора |
Содержание может быть изменено или исправлено